The 2027 PSE Odin Carbon

The 2027 PSE Odin Carbon

PSE's 2027 Odin Carbon brings a redesigned American-made riser and two cam choices to the company's flagship hunting line. Its appeal lies in combining a light platform with options for different draw lengths and an integrated approach to tuning and accessories.

For bowhunters considering carbon, the Odin also raises a practical question: what does the material offer over aluminum, and when is that difference worth paying for?

A redesigned carbon hunting platform

PSE reports 10% greater riser stiffness and an enhanced internal core to reduce vibration. Its FDS system is intended to improve stability at full draw. Those design goals address concerns hunters recognize: how the bow holds while aiming and how it feels when the arrow leaves.

Stiffness means resistance to deflection. Carbon composites allow engineers to tailor a structure through fiber selection, orientation and layup. The finished design determines how those material properties translate into a bow.

PSE also reports development with its professional hunting staff and cycle-testing beyond 100,000 shots at 90 pounds. That describes a test condition; listed hunting configurations top out at 80 pounds.

Two cam options for different draw lengths

Specification FDS FDS XL
Axle-to-axle 34 inches 34 inches
Listed mass weight 3.8 pounds 3.8 pounds
Brace height 6-5/8 inches 6-7/8 inches
Draw length 26-31.5 inches 27.5-33 inches
Published speed rating 340 fps 366 fps at 33-inch draw
Letoff settings 70%, 75%, 80%, 85% 70%, 75%, 80%, 85%
Peak draw-weight options 50, 60, 70, 80 pounds 50, 60, 70, 80 pounds
Listed limb-bolt turns 7 7

Both cams list 12 module positions in half-inch steps. PSE says FDS XL adds 1.5 inches of power stroke and creates a more open string angle at full draw.

Keep the 33-inch draw qualification attached to the XL speed figure. Actual velocity depends on your draw length, draw weight and arrow mass. A chronograph test with your hunting arrow gives you the number relevant to your setup.

Tuning and accessory integration

PSE describes the EZ220-equipped LimbVice system as providing press-free tuning. The practical appeal is easier access to adjustments when establishing a hunting setup.

The equipment list also includes PBTS three-piece string tuning, QAD IMS rest mounting, a Picatinny sight mount, CGM quiver integration and Killshok damping with modular weight options.

PSE's separate EZ220 spacer kit includes a removal and installation tool. Its compatible five-arrow quivers come in one- and two-piece versions with grippers for .246-inch and .166/.204-inch shafts. Killshok X-Weave carbon stabilizers are offered in 6-, 8-, 10- and 12-inch lengths, with two removable 1-ounce weights.

These accessories let the shooter work on balance as well as total weight. Choosing a light riser can leave more room to place useful stabilizer weight where it improves the hold. Evaluate that balance with a loaded quiver and the sight and rest you will actually hunt with.

Carbon bows compared with aluminum

Carbon and aluminum describe the riser construction in this comparison. A carbon bow still uses other materials throughout its limbs, cams and hardware.

Carbon fiber composites offer strong stiffness-to-weight and strength-to-weight performance. That gives designers the opportunity to create a rigid structure at low mass. It does not mean every carbon bow weighs less than every aluminum model; geometry, dimensions and the rest of the components matter.

For a hunter covering miles, reduced carrying weight can be a worthwhile advantage. For a hunter who prefers more mass while aiming, the lightest bow may need added stabilization. Compare complete hunting setups rather than bare-bow weights alone.

Cold-weather comfort is another reason hunters choose carbon. Aluminum conducts heat away from a warm hand quickly. At the same outdoor temperature, carbon composites generally transfer that heat less readily and can feel warmer against the hand. Grip materials and gloves also affect what you feel.

Price often favors aluminum. High-quality carbon structures involve expensive materials and specialized fabrication. An aluminum bow can leave more of the budget for a good sight, rest, arrows and practice.

Shot feel deserves its own test. Riser construction contributes to the response, but so do the bow's geometry, dampers and accessories. Shoot both materials with comparable setups and pay attention to grip comfort, pin movement, feedback and how easily you repeat a shot.

Consideration Why choose carbon Why choose aluminum
Carrying weight Potential for a light, rigid hunting platform A particular model may offer the mass and balance you prefer
Cold-weather grip Often feels warmer in direct contact An insulating grip or gloves can improve comfort
Budget A premium material may justify its cost for your use Often offers a lower purchase price
Shot feel A particular carbon design may suit your preferences A particular aluminum design may shoot equally well for you
Accuracy Depends on fit, tune and execution Depends on fit, tune and execution

Choosing the bow that fits your hunt

The Odin is worth a closer look if your priorities include carrying weight, cold-weather comfort or a cam option that accommodates a longer draw. Start by having a dealer establish the right draw length and compare the available cam options at a weight you can control.

Hold the bow long enough to judge your anchor and sight picture. Then shoot it with the accessories you expect to carry. A comfortable draw and repeatable aiming routine will tell you more about its suitability than a maximum speed figure.

Aluminum remains a sensible choice when a particular bow fits well, balances well and meets the budget. Carbon earns its place when the weight, comfort and shooting characteristics offer a benefit you can recognize.

Once the bow is fitted, tune it with the arrows and broadheads you intend to hunt with. The purchase decision should lead to a complete setup you have verified at the range.

Back to Learn

More articles

View all