The Annihilator was engineered to be the most lethal, strongest, true flying broadhead ever produced. A new shape defining an evolution in broadhead efficiency to ethically take game with a bow or crossbow.


Short Reel of Annihilator Customer Harvest

Play Video


We believe there is no greater satisfaction than harvesting an animal with a bow. The season is short and the time most of us get to spend hunting is even shorter. For years we dreamed of developing the most efficient and reliable fixed blade broadhead ever produced. We wanted something that flew accurately, caused animals to expire faster, and could be used OVER and OVER! As a result, we developed a truly unique broadhead, one you can confidently depend on no matter the size of game.


We eliminated all surfaces that cause broadheads to fly inconsistently. The Annihilator is a smaller cut solid broadhead with no vents or cut outs with 100% symmetry on three sides. The back-scoop wedge design uniquely allows an arrow to fly in its own turbulence air pocket for optimal flight stabilization. The Annihilator creates a medium level of turbulence shielding nearly the entire arrow shaft in flight.


You can expect long range field point accuracy out to as far as you can effectively shoot with zero chance of a mid air failure. And it’s deadly quiet.


The Annihilator works similar to how a maul displaces and splits wood more efficiently and effectively compared to a standard axe. It creates a wedging effect as it passes through animals. It’s the only broadhead ever designed to displace animal tissue and wet viscous material away from the arrow shaft or bolt to intentionally reduce total drag of the entire projectile.


A hole for a wound channel allows your arrow components to essentially draft behind the back of the broadhead as it passes through. A hole also helps to keep your arrow on its same trajectory easier, minimizing arrow deflection. This is especially true if a shoulder plate is hit because once the broadhead punches through the rest of the arrow can travel through more freely.


The net result is significantly reduced friction on your projectile, accomplishing greater penetration efficiency no matter your arrow speed or bow set up.


The Annihilator is the first broadhead designed to cut on contact while boring a hole in an animal cavity that’s larger in size than its cut diameter while other broadheads are designed to kill game by cutting and lacerations alone.


Due to its unique shape and large cutting surface area, the Annihilator also induces higher volumes of both high and low pressure into the animal cavity on impact helping to collapse the pressurized cavity faster. The hole left as a result causes a sucking chest wound so animals collapse and typically expire within sight, no matter their size.


Putting holes in an animal will produce a faster and more consistent death, time and a again, making it a more effective and ethical option to screw onto the end of your arrow.

EXAMPLE: Hog shot at 55 yards with a 65lb bow using a 100 grain Annihilator on a 430 grain arrow. Complete pass-through the shoulder and came out the opposite side. Top left is the exit hole. Top right is a cleaned up view of the Annihilator exit hole relative to the larger exit damage. Bottom left is the wound channel. Bottom right is the entrance through the shoulder plate.
Resharpen Flat On A Stone


The vast majority of broadheads are a one shot use. Moving parts, fasteners, cut outs, etc. all weaken the structural integrity of the broadhead. Buying one time use broadheads is just throwing away your hard earned money. The Annihilator is investment cast out of a single and solid piece of 4140 Alloy, one of the toughest steels available. It is hardened to the perfect Rockwell for exceptional edge retention for that material.


The Annihilator doesn’t warp, bend, or break when passing through an animal, no matter the shot placement. And if you want to resharpen, simply lay it flat on a sharpening stone and take a few passes. Getting a factory edge can be done in the field in under 5 minutes.


The Annihilator is pretty much indestructible. Your arrow shafts and arrow components typically fail before the Annihilator tip or edges role over. Additionally, Annihilators are backed by a lifetime warranty against manufacturing defect.


The Annihilator Broadhead is unlike anything else out there. Its single piece design flies quieter with increased accuracy delivering more damage all while penetrating deeper. The Annihilator was born out of a passion for the hunt. We believe you will have a hard time finding a broadhead you will be more satisfied with.

We stand behind our product with a lifetime guarantee against manufacturing defect.

Annihilator Broadheads are covered by one or more patents.

How we can help?